เกจวัดความกว้างรู วัดขนาดต่างๆ ยี่ห้อ EISEN
EM SERIES : Pin Gauge
The extended range of pin gauge packages, available in more than 150 types, originated with the EM series. Plus and minus packages far exceeding 50,000 in total have been produced so far. Very inexpensive for the number of gauges, each package is rated as a best buy. The EM-00 and EM-3 standard packages include pin gauges in different sizes in 0.01mm and 0.1mm steps, respectively. We also offer pin gauges with 0.025mm size intervals on request
Specifications
Set Range (mm) | Length (mm) | Tolerance | Roundness Cylindricity |
Hardness HRC |
0.100 … 1.525 | 40 | +2μm~5μm or -2μm~5μm |
1.3μm | 58 or more |
1.550 … 12.975 | 50 | |||
13.000 … 19.000 | +1μm~5μm or -1μm~5μm |
1.6μm |
The nominal sizes are indicated on the plastic cases for up to 1.525 mm. For sizes 1.550 mm and larger, the respective nominal sizes are also laser-engraved on the pin gauges along with the letter P for plus pins or M for minus pins.
*Please specify the plus or the minus when you order.
Set No. | Set Range (mm) | Number of Pins |
EM-00 + 00 – |
0.100 0.110 … 0.280 0.290 0.01mm Steps |
20 |
EM-0 + 0 – |
0.300 0.325 … 1.500 1.525 0.025mm Steps |
50 |
EM-1 + 1 – |
1.550 1.575 … 6.250 6.275 0.025mm Steps |
190 |
EM-2A + 2A – |
6.30 0.325 … 9.750 9.775 0.025mm Steps |
140 |
EM-2B + 2B – |
9.800 9.825 … 12.500 12.525 0.025mm Steps |
110 |
EM-2C + 2C – |
12.550 12.575 … 12.950 12.975 0.025mm Steps |
18 |
EM-3 + 3 – |
13.000 13.100 … 18.900 19.000 0.1mm Steps |
61 |
* Separate pin gauges are also available.
* We will produce a special size by the demand.
RG Series : Master Ring Gauge
Master ring gauges are used as references for measuring instruments.
The requirements for the roundness, cylindricality, and the diameters of gauges used as references for precision measuring instruments are defined by JMAS (JAPAN PRECISION MEASURING INSTRUMENTS ASSOCIATION STANDARD). Our master ring gauges have the respective nominal sizes and actual measurements engraved on them.
- Material: SKS3
- Hardness: HRC 58 ~ 62
- Subzero treated and stabilized
- Wrap finished
Specification
Set Range mm D | Outer Diameter D1 |
Thickness K1 |
Chamfering C |
Manufacturing Tolerance |
Roundness・ Cylindricity |
3.00 3.50 … 5.50 6.00 | 30 | 6 | 0.8 | ±0.001 | 0.0005 |
6.50 7.00 … 9.50 10.00 | 30 | 8 | 0.8 | ±0.001 | 0.0005 |
10.50 11.00 … 13.50 14.00 | 40 | 10 | 1 | ±0.001 | 0.0006 |
14.50 15.00 … 17.50 18.00 | 50 | 12 | 1.5 | ±0.001 | 0.0006 |
18.50 19.00 … 23.50 24.00 | 50 | 15 | 1.5 | ±0.001 | 0.0008 |
24.50 25.00 … 29.50 30.00 | 65 | 15 | 1.5 | ±0.001 | 0.0008 |
30.50 31.00 … 39.50 40.00 | 80 | 18 | 1.5 | ±0.0015 | 0.0008 |
40.50 41.00 … 49.50 50.00 | 95 | 20 | 1.5 | ±0.0015 | 0.0008 |
For more infomation please contact : info@kurokicorp.com