Without change lever PCN series

The New Pic Test is a lever type dial indicators used in all over the world. It is a measuring instrument used for measurements of restricted areas,and the outside/inside, groove width and centering with the dial gauge installed to the lathe or the milling cutting machine for measurements with the gauges held on the height gauges.

Without change lever (Automatic inverse type)

The lever type dial gauge of this type has no change lever, the contact point inverses automatically in normal or reverse direction as desired and pointer turns always CW to improve the measuring efficiency.

Miniature Bearing Used

The miniature bearing used as a bearing at the pivot of the contact point to show good indication stability without any effect by rod play.

O-ring used

Oil resistance is enhanced by seating the O-ring in the turning section of the outer frame.

 

Without change lever PCN series

Model PCN-0 Graduation 0.01mm Range 0.5mm Small dial face (Ø29)	Model PCN-1A Graduation 0.01mm Range 0.5mm	Model PCN-1B Graduation 0.01mm Range 0.8mm	Model PCN-1L Graduation 0.01mm Range 1.0mm Long contact point    (L = 42.8mm)
Model PCN-2 Graduation 0.002mm Range 0.28mm	Model PCN-2B Graduation 0.002mm Range 0.2mm	Model PCN-S Graduation 0.001mm Range 0.14mm High accuracy
Model PCN-7A Graduation 0.01mm Range 1.5mm Wide measuring range with Shorter Pointer	Model PCN-7C Graduation 0.002mm Range 0.6mm Wide measuring range with Shorter Pointer

---

Without change lever PCN series (Vertical)

Model PCN-5 Graduation 0.01mm Range 0.5mm

Model PCN-6 Graduation 0.002mm Range 0.28mm

Model PCN-6S Graduation 0.001mm Range 0.14mm

---

Specifications

Model		Graduation (mm)	Range (mm)	Reading	Accuracy (µm)			Measuring force less than (N)
					Wide-range forward accuracy	Adjacent error	Backward error
PCN-0		0.01	0.5	0 – 25 – 0	5	5	3	0.3
PCN-1A		0.01	0.5	0 – 25 – 0	5	5	3	0.3
PCN-1B		0.01	0.8	0 – 40 – 0	8	5	3	0.3
PCN-1L		0.01	1.0	0 – 50 – 0	10	5	4	0.3
PCN-2		0.002	0.28	0 – 140 – 0	3	2	2	0.3
PCN-2B		0.002	0.2	0 – 100 – 0	3	2	2	0.3
PCN-S		0.001	0.14	0 – 70 – 0	3	2	2	0.3
PCN-7A		0.01	1.5	0 – 25 – 0	8	5	3	0.3
PCN-7C		0.002	0.6	0 – 100 – 0	6	2	3	0.3
PCN-5		0.01	0.5	0 – 25 – 0	5	5	3	0.3
PCN-6		0.002	0.28	0 – 140 – 0	3	2	2	0.3
PCN-6S		0.001	0.14	0 – 70 – 0	3	2	2	0.3

Accessories Option ›

Dimensions

Model	L (mm)
PCN-1A, PCN-7A	21.3
PCN-1B	22.2
PCN-1L	42.8
PCN-2	17.8
PCN-2B, PCN-7C	16.6
PCN-S	11.7

---

Model	L (mm)
PCN-0	21.3

---

Model	L (mm)
PCN-5	21.3
PCN-6	17.8
PCN-6S	11.7

---