Dial Gauges are widely used manufacturing plants.
- The stem, made of SK quench hardened with strength, is malfunction-free due to fastening.
- The shock-proof mechanism prevents gears from damage due to shocks arisen by abruptly pushing up the spindle.
- The turning section of the outer frame sealed by the O-ring and the back inside sealed by the packing are waterproof and dust proof in construction.
- The back is increased in strength by four screws, and the lug can be turned 90 degrees in the installation way.
Standard Dial Gauges; 0.01mm
 Indication error ±10µmRetrace error 4µmIncludes accuracy certificationLug back |
Durable type ( Spindle Ø5mm )Lug back |
Lug back | ||||||||||||||||||
Flat back |
Oil-proof typeFlat crystalContact point ( X-2A )Lug back |
Spindle pull-up back leverLug back | ||||||||||||||||||
Spindle lifting lever ( LL-1 )Lug back |
Spindle pull-up release( RE-1 ) 280 mm long Flat back |
Reversed dialFlat back | ||||||||||||||||||
Low-measuring force( initial pressure 0.4N ) Lug back |
Balanced dialLug back |
Tow center pointers(The hand is long enough to facilitate easy reading of measured values.) Lug back | ||||||||||||||||||
Oil-proof typeFlat crystalContact point ( X-2 )Lug back |
Lug back |
Flat back | ||||||||||||||||||
Balanced dialFlat back | ||||||||||||||||||||
Specifications
| Model | Graduation (mm) | Range (mm) | Reading | Indication error (µm) | Backward error (µm) | Repeatability (µm) | Measuring force less than (N) | |||||
| Revolution | Whole measuring range | |||||||||||
| 1/10 | 1/2 | One | Two | |||||||||
| 107-HG | 0.01 | 10 | ±0 -50- 100 | 6 | ±7 | ±8 | ±10 | ±10 | 4 | 5 | 1.4 | |
| 107-DX | 0.01 | 10 | ±0 -50- 100 | 8 | ±9 | ±10 | ±15 | ±15 | 5 | 5 | 1.4 | |
| 107 | 0.01 | 10 | ±0 -50- 100 | 8 | ±9 | ±10 | ±15 | ±15 | 5 | 5 | 1.4 | |
| 107F | 0.01 | 10 | ±0 -50- 100 | 8 | ±9 | ±10 | ±15 | ±15 | 5 | 5 | 1.4 | |
| 107-SWA | 0.01 | 10 | ±0 -50- 100 | 8 | ±9 | ±10 | ±15 | ±15 | 5 | 5 | 1.4 | |
| 107-BL | 0.01 | 10 | ±0 -50- 100 | 8 | ±9 | ±10 | ±15 | ±15 | 5 | 5 | 1.4 | |
| 107-LL | 0.01 | 10 | ±0 -50- 100 | 8 | ±9 | ±10 | ±15 | ±15 | 5 | 5 | 1.4 | |
| 107F-RE | 0.01 | 10 | ±0 -50- 100 | 8 | ±9 | ±10 | ±15 | ±15 | 5 | 5 | 1.4 | |
| 107F-T | 0.01 | 10 | ±100 -50- 0 | 8 | ±9 | ±10 | ±15 | ±15 | 5 | 5 | 1.4 | |
| 107-E | 0.01 | 10 | ±0 -50- 100 | 8 | ±9 | ±10 | ±15 | ±15 | 5 | 5 | * 0.4 | |
| 17 | 0.01 | 1 | 0 -50- 0 | 8 | ±9 | ±10 | — | — | 5 | 5 | 1.4 | |
| 107W | 0.01 | 10 | ±0 -50- 100 | 8 | ±9 | ±10 | ±15 | ±15 | 5 | 5 | 1.4 | |
| 57-SWA | 0.01 | 5 | ±0 -50- 100 | 8 | ±9 | ±10 | ±15 | ±15 | 5 | 5 | 1.4 | |
| 57 | 0.01 | 5 | ±0 -50- 100 | 8 | ±9 | ±10 | ±15 | ±15 | 5 | 5 | 1.4 | |
| 57F | 0.01 | 5 | ±0 -50- 100 | 8 | ±9 | ±10 | ±15 | ±15 | 5 | 5 | 1.4 | |
| 57B | 0.01 | 5 | 0 -50- 0 | 8 | ±9 | ±10 | ±15 | ±15 | 5 | 5 | 1.4 | |
* initial pressure 0.4N
Go to Replaceable contact points
Dimensions (mm)
| Model | A | B | C | D | E | F | G | H | I | J | |
| 107-HG | 65 | 41.5 | 18.5 | 53 | 14.5 | 20 | 4 | 6.5 | 49 | 8.0 | |
| 107-DX | 65 | 50.7 | 17 | 55.7 | 14.5 | 20 | 5 | 7 | 52 | 8.0 | |
| 107 | 65 | 41.5 | 18.5 | 53 | 14.5 | 20 | 4 | 6.5 | 49 | 8.0 | |
| 107F | 65 | 41.5 | 18.5 | 53 | 14.5 | — | 4 | 6.5 | 49 | 8.0 | |
| 107-SWA | 68 | 41.5 | 17.5 | 55 | 15 | 20 | 4 | 6.5 | 49 | 8.0 | |
| 107-BL | 65 | 41.5 | 18.5 | 53 | 14.5 | 4 | 6.5 | 49 | 8.0 | ||
| 107F-RE | 65 | 41.5 | 18.5 | 53 | 14.5 | 20 | 4 | 6.5 | 49 | 8.0 | |
| 107-LL | 65 | — | 18.5 | 53 | 14.5 | 20 | 4 | 6.5 | 49 | 8.0 | |
| 107W | 65 | 41.5 | 17.5 | 55 | 17 | 20 | 4 | 6.5 | 49 | 8.0 | |
| 107F-T | 65 | 41.5 | 18.5 | 53 | 14.5 | — | 4 | 6.5 | 49 | 8.0 | |
| 107-E | 65 | 41.5 | 18.5 | 53 | 14.5 | 20 | 4 | 6.5 | 49 | 8.0 | |
| 17 | 65 | 41.5 | 18.5 | 53 | 14.5 | 20 | 4 | 6.5 | 49 | 8.0 | |
| 57-SWA | 65 | 41.5 | 18.5 | 55 | 15 | 20 | 4 | 6.5 | 49 | 8.0 | |
| 57 | 65 | 41.5 | 18.5 | 53 | 14.5 | 20 | 4 | 6.5 | 49 | 8.0 | |
| 57F | 65 | 41.5 | 18.5 | 53 | 14.5 | — | 4 | 6.5 | 49 | 8.0 | |
| 57B | 65 | 41.5 | 18.5 | 53 | 14.5 | — | 4 | 6.5 | 49 | 8.0 | |
