Peacock offers a complete line of Dial Bore Gauges with interchangeable anvils and necessary accessories to perform close tolerance measurements of holes, taper and roundness.
- Dial gauge mounting knob is very simple of and sure avoiding demerit of collet-system.
- The contact point is tungsten carbide ball.
- Dial gauge is not furnished and supplied only on request. Suitable dial gauges are 17Z, 57B (0.01mm) and 15Z, 5F (0.001mm).
- The standard ball tipped at the replacement rod is made of steel. The sintered hard-alloy ball is also available to tip.
Standard Cylinder Gauges : CC series
|
|
|
||||||||||||
|
|
CC-1 head details |
||||||||||||
CC-2 head details |
Specifications
Model | Range (mm) |
Effective measuring range (mm) |
Wide range accuracy (µm) |
Adjacent error (µm) |
Repeated accuracy (µm) |
Number of anvils (mm) |
Thickness of spacers (mm) |
Extension collar (mm) |
|
CC-02 | 6 – 10 | 0.5 | 5 | 2 | 2 | Intervals 0.5mm×9 | — | ||
CC-01 | 10 – 18 | 0.5 | 5 | 2 | 2 | Intervals 1mm×9 | 0.5mm | ||
CC-1 | 18 – 35 | 1.2 | 5 | 2 | 2 | Intervals 2mm×9 | 0.5, 1mm each | ||
CC-2 | 35 – 60 | 1.2 | 5 | 2 | 2 | Intervals 5mm×6 | 1, 2, 3mm each | ||
CC-3 | 50 – 100 | 1.2 | 5 | 2 | 2 | Intervals 5mm×11 | 1, 2, 3mm each | ||
CC-3C | 50 – 150 | 1.2 | 5 | 2 | 2 | Intervals 5mm×11 | 1, 2, 3mm each | 50mm×1 | |
CC-4 | 100 – 160 | 1.2 | 5 | 2 | 2 | Intervals 10mm×7 | 1, 2, 3, 4mm each | ||
CC-5 | 160 – 250 | 1.2 | 5 | 2 | 2 | Intervals 10mm×10 | 1, 2, 3, 4mm each | ||
CC-6 | 250 – 400 | 1.2 | 5 | 2 | 2 | Intervals 10mm×16 | 1, 2, 3, 4mm each |
List of special length below grip (available on request)
Model | Range (mm) |
Length below grip (L) (mm) |
|||||||||||||
CC-01 | 10 – 18 | L 50 | L 200 | L 300 | |||||||||||
CC-1 | 18 – 35 | L 100 | L 200 | L 300 | L 400 | L 500 | |||||||||
CC-2 | 35 – 60 | L 100 | L 200 | L 300 | L 400 | L 500 | L 600 | L 700 | L 800 | L 900 | L 1000 | L 1500 | L 2000 | ||
CC-3 | 50 – 100 | L 100 | L 200 | L 300 | L 400 | L 500 | L 600 | L 700 | L 800 | L 900 | L 1000 | L 1500 | L 2000 | ||
CC-3C | 50 – 150 | L 100 | L 200 | L 300 | L 400 | L 500 | L 600 | L 700 | L 800 | L 900 | L 1000 | L 1500 | L 2000 | ||
CC-4 | 100 – 160 | L 50 | L 100 | L 200 | L 300 | L 400 | L 500 | L 600 | L 700 | L 800 | L 900 | L 1000 | L 1500 | L 2000 | |
CC-5 | 160 – 250 | L 50 | L 100 | L 200 | L 300 | L 400 | L 500 | L 600 | L 700 | L 800 | L 900 | L 1000 | L 1500 | L 2000 | |
CC-6 | 250 – 400 | L 50 | L 100 | L 200 | L 300 | L 500 | L 600 | L 700 | L 800 | L 900 | L 1000 | L 1500 | L 2000 |
Dimensions (mm)
Model | A | B | C | D | E | F | G | H | I | J |
CC-1 | 249 | 150 | 5.75 | 70 | 23 | 20 | 10 | 18 – 35 | 13 | 11.5 |
CC-2 | 251.5 | 150 | 8.5 | 70 | 23 | 20 | 10 | 35 – 60 | 22 | 17 |
CC-3 | 253 | 150 | 9 | 70 | 23 | 20 | 10 | 50 – 100 | 30 | 18 |
CC-3C | 253 | 150 | 9 | 70 | 23 | 20 | 10 | 50 – 150 | 30 | 18 |
CC-4 | 370 | 250 | 12 | 85 | 23 | 25 | 13 | 100 – 160 | 50 | 24 |
CC-5 | 391.5 | 251.5 | 14 | 100 | 26 | 25 | 16 | 160 – 250 | 70 | 28 |
CC-6 | 540 | 400 | 14 | 100 | 26 | 25 | 16 | 250 – 400 | 100 | 28 |
Dimensions (mm) : CC 02
Dimension (mm) : CC-01
Dimensions for Anvil for Cylinder Gauges
|
|||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||
|
Dimensions for Spacers for Cylinder Gauges
|