With its high resolution of 0.001mm scale, it is most suitable for judgement of the values measured on finished parts with high accuracy.
|
With its resolution of 0.01mm scale, it is generally used. Its pointer is in an anti-shock structure so as to give stable discriminating signals.
|
||||||||||||
With its most gross scale of 0.05 mm, it is applicable to select grossly worked parts and as cast parts at the lowest costs.
|
Once its tolerance is set, a dial gauge is dismounted before using it so that its endurance is really improved. With its large tolerance setting range of 3mm, it is most suitable for judgement of the measured values in a wide tolerance range.
|
Specifications
Model | S-5 | S-7 | S-9 | SC-2A | ||||||||||||||||||||||||||||||||||||||||||||
Spindle Movable Range |
3mm | 3mm | 4mm | 10mm | ||||||||||||||||||||||||||||||||||||||||||||
Graduation | 0.001mm | 0.01mm | 0.05mm | ※1 | ||||||||||||||||||||||||||||||||||||||||||||
Tolerance Setting Range |
0.1 ( ±0.05 ) mm | 1.0 ( ±0.5 ) mm | 3.0 ( ±1.5 ) mm | 3.0mm | ||||||||||||||||||||||||||||||||||||||||||||
Accuracy | ±0.002mm | ±0.005mm | ±0.025mm | ±0.005mm | ||||||||||||||||||||||||||||||||||||||||||||
Measuring Force | Less than 1.2N ( 120gf ) | |||||||||||||||||||||||||||||||||||||||||||||||
Contact capacity | MAX DC24V 20mA | |||||||||||||||||||||||||||||||||||||||||||||||
Number of judgement Stages |
Three stages of -NG, OK and +NG | |||||||||||||||||||||||||||||||||||||||||||||||
Cord length | 2 m | |||||||||||||||||||||||||||||||||||||||||||||||
Stem diameter | ø8 mm | |||||||||||||||||||||||||||||||||||||||||||||||
Operating temperature range |
0 – 60 ℃ | |||||||||||||||||||||||||||||||||||||||||||||||
Options | Code Length 5m 10m / Back cover with Lug (GB-1A) | Dial gauge for setting | ||||||||||||||||||||||||||||||||||||||||||||||
Dial indicator for setting |
—– | Model 107F, 5F | ||||||||||||||||||||||||||||||||||||||||||||||
Weight | 180 g | 150 g | ||||||||||||||||||||||||||||||||||||||||||||||
Cable signal table |
|
|||||||||||||||||||||||||||||||||||||||||||||||
Caution |
|
|||||||||||||||||||||||||||||||||||||||||||||||
※1 In SC-2A type, the minimum readable value depends on a dial gauge to be attached. |
Dimensions
Outer Dimension ( S-5, S-7 & S-9 )
Outer Dimension ( SC-2A )