This is a compact cylinder gauge with a length below grip of 50 mm. It is used when a standard item is too long to measure the object or a shorter length of below grip is required for conveniently. Specifications are same as standard model.
Dial gauge is not furnished and supplied only on request.
Suitable dial gauges are 17Z, 57B (0.01mm) and 15Z, 5F (0.001mm).
Short Size Cylinder Gauges : S series
|
|
|
Specifications
Model | Range (mm) |
Effective measuring range (mm) |
Wide range accuracy (µm) |
Adjacent error (µm) |
Repeated accuracy (µm) |
Number of anvils (mm) |
Thickness of spacers (mm) |
Extension collar (mm) |
|
CC-1S | 18 – 35 | 1.2 | 5 | 2 | 2 | Intervals 2mm×9 | 0.5, 1mm each | ||
CC-2S | 35 – 60 | 1.2 | 5 | 2 | 2 | Intervals 5mm×6 | 1, 2, 3mm each | ||
CC-3S | 50 – 100 | 1.2 | 5 | 2 | 2 | Intervals 5mm×11 | 1, 2, 3mm each | ||
CC-3CS | 50 – 150 | 1.2 | 5 | 2 | 2 | Intervals 5mm×11 | 1, 2, 3mm each | 50mm×1 |
List of special length below grip (available on request)
Dimensions (mm)
Model | A | B | C | D | E | F | G | H | I | J |
CC-1S | 150 | 50 | 5.75 | 70 | 23 | 20 | 10 | 18 – 35 | 13 | 11.5 |
CC-2S | 151.5 | 50 | 8.5 | 70 | 23 | 20 | 10 | 35 – 60 | 22 | 17 |
CC-3S | 152 | 50 | 9 | 70 | 23 | 20 | 10 | 50 – 100 | 30 | 18 |
CC-3CS | 152 | 50 | 9 | 70 | 23 | 20 | 10 | 50 – 150 | 30 | 18 |
Dimensions for Anvil for Cylinder Gauges
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
|
Dimensions for Spacers for Cylinder Gauges
Model | T (mm) | A (mm) | B (mm) |
CC-1S | 0.5, 1 | 4.1 | 7 |
CC-2S | 1, 2, 3 | 5.1 | 8 |
CC-3S | 1, 2, 3 | 5.1 | 8 |
CC-3CS | 1, 2, 3 | 5.1 | 8 |