Dial Gauges are widely used manufacturing plants.
- The stem, made of SK quench hardened with strength, is malfunction-free due to fastening.
- The shock-proof mechanism prevents gears from damage due to shocks arisen by abruptly pushing up the spindle.
- The turning section of the outer frame sealed by the O-ring and the back inside sealed by the packing are waterproof and dust-proof in construction.
- The back is increased in strength by four screws, and the lug can be turned 90 degrees in the installation way.
Long Travel Dial Gauges: 0.01mm, 0.05mm, and 0.1mm
|
Flat back |
Flat back | ||||||||||||||||||
Small dial face type ( Ø53mm ) Lug back |
Lug back |
(The hand is long enough to facilitate easy reading of measured values.) Lug back | ||||||||||||||||||
(The hand is long enough to facilitate easy reading of measured values.) Reversed dial Flat back |
Contact point ( X-2 ) Lug back |
Stem Ø8mm | ||||||||||||||||||
Stem Ø10mm |
Stem Ø10mm |
Stem Ø14mm |
Specifications
Model | Graduation (mm) | Range (mm) | Reading | Indication error (µm) | Backward error (µm) | Repeatability (µm) | Measuring force less than (N) | |||||
Revolution | Whole measuring range | |||||||||||
1/10 | 1/2 | One | Two | |||||||||
207 | 0.01 | 20 | ±0 -50- 100 | 10 | — | ±15 | — | ±20 | 7 | 5 | 2.0 | |
207F-T | 0.01 | 20 | ±100 -50- 0 | 10 | — | ±15 | — | ±20 | 7 | 5 | 2.0 | |
207F-PL | 0.01 | 20 | ±0 -50- 100 | 10 | — | ±15 | — | ±20 | 7 | 5 | 2.0 | |
207S-LL | 0.01 | 20 | ±0 -50- 100 | 10 | — | ±15 | — | ±20 | 7 | 5 | 2.0 | |
207S | 0.01 | 20 | ±0 -50- 100 | 10 | — | ±15 | — | ±20 | 7 | 5 | 2.0 | |
207W | 0.01 | 20 | ±0 -50- 100 | 10 | — | ±15 | — | ±20 | 7 | 5 | 2.0 | |
207WF-T | 0.01 | 20 | ±100 -50- 0 | 10 | — | ±15 | — | ±20 | 7 | 5 | 2.0 | |
307S | 0.01 | 30 | ±0 -50- 100 | 14 | — | ±18 | — | ±25 | 7 | 5 | 2.2 | |
307 | 0.01 | 30 | ±0 -50- 100 | 14 | — | ±18 | — | ±25 | 7 | 5 | 2.2 | |
507 | 0.01 | 50 | ±0 -50- 100 | 15 | — | ±20 | — | ±35 | 9 | 5 | 2.5 | |
509 | 0.05 | 50 | ±0 -5- 10 | 30 | — | ±100 | — | ±100 | 10 | 20 | 2.5 | |
809 | 0.1 | 80 | ±0 -5- 10 | 50 | — | ±100 | — | ±100 | — | 35 | 2.5 | |
Go to Replaceable contact points
Dimensions (mm)
Model | A | B | C | D | E | F | G | H | I | J | |
207 | 90 | 41 | 25 | 66.5 | 14.5 | 20 | 5 | 7.5 | 62.5 | 8.0 | |
207F-PL | 90 | 41 | 25 | 66.5 | 14.5 | — | 5 | 7.5 | 62.5 | 8.0 | |
207F-T | 90 | 41 | 25 | 66.5 | 14.5 | — | 5 | 7.5 | 62.5 | 8.0 | |
207S-LL | 75 | 50.5 | 18.5 | 53 | 14.5 | 20 | 4 | 6.5 | 49 | 8.0 | |
207S | 75 | 50.5 | 18.5 | 53 | 14.5 | 20 | 4 | 6.5 | 49 | 8.0 | |
207W | 75 | 50.5 | 17.5 | 55 | 17 | 20 | 4 | 6.5 | 49 | 8.0 | |
207WF-T | 75 | 50.5 | 17.5 | 55 | 17 | — | 4 | 6.5 | 49 | 8.0 | |
307S | 107 | 89 | 22 | 57 | 17.5 | 20 | 5 | 7 | 52 | 8.0 | |
307 | 102 | 46 | 22.8 | 75.5 | 17.5 | 21 | 5 | 8 | 72.5 | 8.0 | |
507 | 128 | 81.5 | 26.7 | 81.5 | 17.5 | 21.5 | 5.5 | 8.5 | 78.5 | 10.0 | |
509 | 128 | 81.5 | 26.7 | 81.5 | 17.5 | 21.5 | 5.5 | 8.5 | 78.5 | 10.0 | |
809 | 201.5 | 86.5 | 54 | 112 | 24 | 22.5 | 6 | 10 | 108 | 14.0 |