Measurement range (0 – 50mm , 0 – 100mm)
- With very sturdy ø 20mm stem.
- Ultra-high precision achievable with exclusive gauge stand (PDS-2)
 |
 |
Options
• Level mounting clamp ( GB-50 )
2 pcs of socket screw
• Special Gauge For High Temperature
Applications D-50HT
This special gauge can be used up to +65ºC temperature.
( D-50S is not suited for high temperature )
Specifications
| Model | D-50 | D-50S | D-100 | D-100S | |
| Range | 50mm | 100mm | |||
| Resolution | 0.01mm | 0.001mm | 0.01mm | 0.001mm | |
| Accuracy (excluding quantized error) |
0.01mm | 0.004mm | 0.01mm | 0.005mm | |
| Measuring force | Less than 3.0N | Less than 3.5N | |||
| Cable length | 2m | ||||
| Mounting method | ø 20mm stem or fastening by M4 screws at two positions | ||||
| Contact point | M2.5 × 0.45 Sø 2.4mm steel | ||||
| Operating temperature | 0 – 40ºC | ||||
| Weight | 450g | 520g | |||
| Output signal | 90º phase difference, 20µm pitch (R03-PB8M Tajimi connector) | ||||
| Compatible standard counters | C-500 / C-700 / CM-5B | ||||
| Accessories | Finger lever for lifting spindle —> 1 pc | ||||
| Featuares |  If Spindle inner spring is removed, measuring force will be that of spindle itself(only when in upright position) D-50 , D-50S —> 1.0N D-100 , D-100S —> 1.1N Recommended stand is PDS-2 |
||||
| Option | Level mounting clamp ( GB-50 )Customer must specify if application is up-side-down. The measuring force changes when the gauge is inverted. |
||||
Dimensions
D-50 / D-50S / D-50HT
D-100 / D-100S
