Measurement range ( 0 – 5mm )
- Best suited for deviation measurement. (DL-2/DL-2S)
- Best suited for confined conditions. (D-5/D-5S)
- Best suited for work in confined space measurement. (D-5UZ)
|
DL-2/DL-2S Lever slides vertically, straight up and down, as shown, ( to eliminate error caused by arc operation. ) |
Pencil Type | D-5 | D-5S |
Resolution | 0.01mm | 0.001mm |
Range | 0~5mm | 0~5mm |
Small Type | D-5UZ |
Resolution | 0.01mm |
Range | 0~5mm |
Specifications
Model | DL-2 | DL-2S | D-5 | D-5S | D-5UZ | |
Range | (*1) 2mm | 5mm | 5mm | |||
Resolution | 0.01mm | 0.001mm | 0.01mm | 0.001mm | 0.01mm | |
Accuracy (excluding quantized error) |
(*2) 0.01mm | (*2) 0.002mm | 0.005mm | 0.002mm | 0.01mm | |
Measuring force | Less than 0.6N | Less than 0.5N | Less than 1.0N | |||
Mounting method | ø 6.5mm hole on lug back or dovetail at bottom |
ø 8mm stem | ø 6.5mm hole on lug back | |||
Contact point | Sø 2mm carbide | Sø 2.4mm cooper (X-2) | Sø 2.4mm steel (X-107) | |||
Cord length | 2m | |||||
Operating temperature | 0 – 40ºC | |||||
Output signal | 90º phase difference, 20µm pitch (R03-PB8M Tajimi connector) | |||||
Compatible standard counters |
C-500 / C-700 CM-5B |
|||||
Options | Extension cables of 2, 3, 5, and 10 meters are available | |||||
(*1) Lever moves linearly, unlike the arc movement in a lever type dial indicator. (*2) Largest deviation value if narrow range for every 0.5mm step. |
Dimensions
DL-2 / DL-2S
D-5 / D-5S
D-5UZ XS-6