Measurement range (0 – 20mm)
- 10mm and 20mm measurement ranges are the easiest to use.
- Used in conjunction with digital counters, these gauges can be set up in places where dial gauges are now being used.
- Set the gauge by either stem or lug back.
- For lifting spindle, both lever and release types are available.
Rectangular wave output typ (DN-10/DN-10S/DN-20/DN-20S)
* For use in electrically noisy environments.
* For applications requiring extra long cables. (10 to 50 meters are available)
Output wiring (DN-10/DN-20)
Output wiring (DN-10S/DN-20S)
Specifications
Model | D-10 | D-10S | DN-10 | DN-10S | D-20 | D-20S | DN-20 | DN-20S |
Range | 10mm | 20mm | ||||||
Resolution | 0.01mm | 0.001mm | 0.01mm | 0.001mm | 0.01mm | 0.001mm | 0.01mm | 0.001mm |
Accuracy (excluding quantized error) |
0.005mm | 0.002mm | 0.01mm | 0.002mm | 0.005mm | 0.003mm | 0.01mm | 0.003mm |
Measuring force | Less than 1.0N | Less than 1.5N | ||||||
Cable length | 2m | |||||||
Mounting method | Ø8mm stem or 6.5mm hole on lug back | |||||||
Contact point | M2.5 × 0.45 SØ2.4mm steel (X-2) | |||||||
Operating temperature | 0 – 40ºC | |||||||
Weight | 220g | 300g | ||||||
Output Signal | 90º phase difference, 20µm pitch (R03-PB8M Tajimi connector) Rectangular wave (L=0v H=5v) |
|||||||
Compatible standard counters |
C-500 / C-700 CM-5B (*except DN-10S, DN-20S) |
|||||||
Options | * Release (RE-4) Lifting lever (LL-1) * Dust proof rubber (BG-10) * Flat back (GB3-D1O) , screws (S-110) |
* Release (RE-4) * Flat back (GB3-D20) |
||||||
* Customer must specify if application is up-side-down. The measuring force changes when the gauge is inverted. |
||||||||
* Features DN-10 DN-10S DN-20 DN-20S 1. Recommended for locations where cable extension (10 to 50 meters) is necessary. 2. Recommended for use in electrically noisy environments. Notes of wiring : A signal wire should be duct wiring apart from other Power lines. |
Options
Split collar(WB-1) Split collar above is used on the Ø8mm stem during mounting to prevent malfunction due over tightening. Securing by means of screw directly in stem may result in malfunction. |
Dust proof rubber(BG-10) Compressible dust proof rubber fits all D-5, D-5S, D-10S ,D-10SS ,D-10HS gauges. (Stroke under 10mm) |
Release(RE-4) Total length 300mm |
Lifting lever(LL-1) |
Extension cable 2, 3, 5 and 10 meters are standard lenght. |
Extension cable with metal sheathing 2 and 3 meters are standard lenght. |
Dimensions
D-10 / D-10S / DN-10 / DN-10S / D-10SS
D-20 / D-20S / DN-20 / DN-20S