Digital Gauges PDN Series
PDN-21 PDN-51 |
Integrated Display Type |
PDN-CC | for Cylinder Gauge |
PDN-PP | for measuring the height of milling cutter |
Dimensions |
Digital Gauges PDN-21/PDN-51
|
|
||||||||||||
Gauge Stand No.SIS-6C
Optional accessories for PDN-21
Flat Back No.GB-3D20 | Finger Leve No.LL-D20 | Release No.RE-4 | Lifting Lever No.LL-PD |
Optional accessories for PDN-21 & PDN-51
Input adapter No.IF-21 | Foot switch No.FW-1 |
Input adapter can send a measuring data to a |
Specifications
Model | PDN-21 | PDN-51 | |||||||||||||||||||||
Range | 20mm | 50mm | |||||||||||||||||||||
Resolution | Convertible 0.01mm and 0.001mm ( Set 0.001mm at the time of shipment ) | ||||||||||||||||||||||
Accuracy (excluding quantized error) |
0.001mm Display: 0.003mm 0.01mm Display: 0.01mm |
0.001mm Display: 0.004mm 0.01mm Display: 0.01mm |
|||||||||||||||||||||
Measuring force | Less than 1.5N Without spring: less than 0.31N |
Less than 3.1N Without spring: less than 1.0N |
|||||||||||||||||||||
Response speed | 1000mm/sec | ||||||||||||||||||||||
Contact point | X-2 ( M2.5×0.45 ) | X-9 ( M2.5×0.45 ) | |||||||||||||||||||||
Display rotation | 280º | ||||||||||||||||||||||
Operating temperature | 0 – 40ºC | ||||||||||||||||||||||
Functions |
|
||||||||||||||||||||||
Data output | RS-232C | ||||||||||||||||||||||
Power supply (AC Adapter) | AC100 – 240V ±10% 50/60Hz | ||||||||||||||||||||||
Accessories | AC Adapter | AC Adapter Finger Lever No.LL-50 | |||||||||||||||||||||
Options |
|
Go to top
Digital Gauges PDN-CC
Model | PDN-CC ( for Cylinder Gauge ) |
Resolution | 0.001mm ( convertible to 0.01mm ) |
Range | 0 – 20mm |
Specifications
Model | PDN-CC | |||||
Range | 20mm | |||||
Resolution | Convertible 0.01mm and 0.001mm ( Set 0.001mm at the time of shipment ) |
|||||
Accuracy (excluding quantized error) |
0.001mm Display: 0.003mm 0.01mm Display: 0.01mm |
|||||
Measuring force | Less than 1.5N | |||||
Response speed | 1000mm/sec | |||||
Display rotation | 280º | |||||
Power supply (AC Adapter) | AC100 – 240V ±10% 50/60Hz | |||||
Operating temperature | 0 – 40ºC | |||||
Data output | RS-232C | |||||
Backs | Flat Back ( GB-3D20 ) | |||||
Functions |
|
|||||
Options | Same as PDN-21 |
Cylinder Gauges which you have now can be attached to PDN-CC and measure. ( Cylinder Gauge is optional. )
“CC” series | “CG” series | ||
CC-02 | 6 – 10mm | ||
CC-01 | 10 – 18mm | CG-01 | 10 – 18mm |
CC-1 | 18 – 35mm | CG-1 | 18 – 35mm |
CC-2 | 35 – 60mm | CG-2 | 35 – 60mm |
CC-3 | 50 – 100mm | CG-3 | 50 – 100mm |
CC-3C | 50 – 150mm | CG-3C | 50 – 150mm |
CC-4 | 100 – 160mm | CG-4 | 100 – 160mm |
CC-5 | 160 – 250mm | CG-5 | 160 – 250mm |
CC-6 | 250 – 400mm | CG-6 | 250 – 400mm |
Example (PDN-CC)
Digital Gauges PDN-PP
Model | PDN-PP ( for measuring the height of milling cutter ) |
Resolution | 0.001mm ( convertible to 0.01mm ) |
Range | 0 – 20mm |
Specifications
Model | PDN-PP | |||||
Range | 20mm | |||||
Resolution | Convertible 0.01mm and 0.001mm ( Set 0.001mm at the time of shipment ) |
|||||
Accuracy (excluding quantized error) |
0.001mm Display: 0.003mm 0.01mm Display: 0.01mm |
|||||
Measuring force | Less than 1.5N | |||||
Response speed | 1000mm/sec | |||||
Display rotation | 280º | |||||
Power supply (AC Adapter) | AC100 – 240V ±10% 50/60Hz | |||||
Operating temperature | 0 – 40ºC | |||||
Data output | RS-232C | |||||
Functions |
|
|||||
Options | Same as PDN-21 |
Example (PDN-PP)
Dimensions
PDN-21 / PDN-CC / PDN-PP
PDN-51