Deep Hole Bore Gauges

• The EMCC Series can easily measure the inside diameter of deep bore with high accuracy, which has been precision-machined.
• The EMCC Series advances a detector having an automatic alignment mechanism in line with the inside diameter.
• Measurement is possible up to the length of 10m by using an additional extension rod.

 

Deep Hole Bore Gauges – EMCC Series

Model

EMCC-3

Counter ( C-500 )

 

Specifications

Model			EMCC-2	EMCC-3	EMCC-4	EMCC-5	EMCC-6
Measuring range ( ID )			35 – 60mm	50 – 100mm	100 – 160mm	160 – 250mm	250 – 400mm
Measuring depth			70mm – 10m	90mm – 10m	120mm – 10m	130mm – 10m	150mm – 10m
Provided rods			6 rods	11 rods	7 rods	10 rods	16 rods
Provided contact point			L = 33mm ( flat type )		L = 44mm ( flat type )
Contact point’s travel and measuring force			1.4mm  less than 2N
Extension rods			EMCC-L ( 1 meter rod × 10 rods = 10 meters ) —> sold separately
Compatible linear gauges ( 1 )			When Resolution is 10µm, use Peacock D-5B When Resolution is 1µm, use Peacock D-5SB   Model ( Gauge Sensor ) D-5B D-5SB   Resolution 0.01mm 0.001mm   Accuracy 0.01mm 0.002mm   Cable length 10 meters   Size of set screws M2.5 × 0.45mm   Measuring force Less than 0.5N   Remarks Specifications are according to D-5S
Compatible counters ( 2 )			C-500 ( 10µm, 1µm Type )
Operations			Test completes only after receiving reference from a master and inserting the    micrometer head through a workpiece. Automatic centering mechanism requires no manual “shaking” to center up the    micrometer head.
Functions			Workpiece has to be horizontally level    ( No test can be performed with the workpiece perpendicular ).

To make up a complete working unit, it requires an EMCC ( 2 – 6 ), an EMCC-L ( extension rod set ), a linear gauge and a counter.

 

Dimensions

Dimensions ( mm )	A		70	71	77	77	77
	B		20	30	40	45	50
	C		30	40	55	60	70
	D		62	82	115	125	140
	E		15	20	38	58	88
	F		22	30	50	70	100
	G	MIN	35	50	100	160	250
		MAX	60	100	160	250	400