Applied Dial Thickness Gauges
LOW MEASURING FORCE 0.4N TO MEASURE THICKNESS OF SOFT MATERIAL |
G-0.4N, H-0.4N (Stamped with 0.4N) |
HIGH MEASURING FORCE 2.4N TO MEASURE THICKNESS OF HARD MATERIAL |
G-2.4N, H-2.4N (Stamped with 2.4N) |
LARGE DIA CONTACT POINT AND ANVIL BEST MEASUREMENT OF Urethane form, common fabric and so on! |
G-20, H-20 (20mm dia ; Flat type) G-30, H-30 (30mm dia ; Flat type) |
Applied Dial Thickness Gauges 0.01mm type
Ø10mm flat contact point and anvil (ceramic) |
Ø10mm flat contact point and anvil (ceramic) |
||||||||||||
Ø10mm flat contact point and anvil (ceramic) |
Ø10mm flat contact point and anvil (ceramic) |
||||||||||||
|
|
||||||||||||
|
|
Specifications
Model | Graduation (mm) |
Range (mm) |
Throat depth (mm) |
Accuracy (µm) |
Contact Point | Measuring force less than (N) |
||
Dia (mm) | Parallelism (µm) | |||||||
G-0.4N | 0.01 | 0 – 10 | 20 | ±20 | 10 | 5 | Initial pressure 0.4N | |
G-2.4N | 0.01 | 0 – 10 | 20 | ±20 | 10 | 5 | Final pressure 2.4N | |
G-20 | 0.01 | 0 – 10 | 20 | ±20 | 20 (metal) | 15 | 1.8 | |
G-30 | 0.01 | 0 – 10 | 20 | ±20 | 30 (metal) | 20 | 1.8 | |
H-0.4N | 0.01 | 0 – 10 | 120 | ±20 | 10 | 5 | Initial pressure 0.4N | |
H-2.4N | 0.01 | 0 – 10 | 120 | ±20 | 10 | 5 | Final pressure 2.4N | |
H-20 | 0.01 | 0 – 10 | 120 | ±20 | 20 (metal) | 15 | 1.8 | |
H-30 | 0.01 | 0 – 10 | 120 | ±20 | 30 (metal) | 20 | 1.8 |
Dimensions
Dimensions; G-0.4N, G-2.4N |
Dimensions; G-20 |
Dimensions; G-30
Dimensions; H-0.4N, H-2.4N
Dimensions; H-20
Dimensions; H-30