The sheet gauges can measure wide sheets since the throat depth of this gauges having 300, 500 and 690mm.
Dial Sheet Gauges 0.01mm and 0.05mm
and Ø20mm anvil |
|||||||||
and anvil |
|||||||||
and Ø20mm anvil |
|||||||||
and anvil |
Model | K-7 |
Graduation | 0.05mm |
Range | 0 – 50mm |
Throat depth | 690mm |
Ø30mm flat contact point and anvil
Custom order available
Optional Ø30, 40 and 50mm contact points and anvils are available.
Please specify material for contact point and anvil, either SK
material or aluminum.
Specifications
Model | Graduation (mm) |
Range (mm) |
Throat depth (mm) |
Accuracy (µm) |
Contact Point | Anvil Dia (mm) |
Measuring force less than (N) |
||
Dia (mm) | Parallelism (µm) | ||||||||
K-1 | 0.01 | 0 – 20 | 300 | ±22 | 10 | 10 | 20 | 2.0 | |
K-2 | 0.05 | 0 – 35 | 300 | ±100 | 20 | 25 | 20 | 3.0 | |
K-3 | 0.01 | 0 – 20 | 500 | ±22 | 10 | 10 | 20 | 3.0 | |
K-4 | 0.05 | 0 – 50 | 500 | ±100 | 25 | 25 | 25 | 3.0 | |
K-7 | 0.05 | 0 – 50 | 690 | ±100 | 30 | 25 | 30 | 3.0 |
* Model K-7 is production request.